An XHO or Lumi Lite strip without a T5 fixture to mount to, a fixed brightness with no dimming, or two strips needing two separate power adapters - Reef Brite's accessory line solves each of these with a small, purpose-built part.
Mounting Without a T5 Fixture
The XHO LED Mounting Legs are stand-alone legs for mounting an XHO strip light without a T5 fixture to attach to - useful for placing an XHO flat over a sump, frag tank, or refugium.
Manual Brightness Control
The In-Line Dimmer wires between a Reef Brite LED strip and its power supply, letting you adjust brightness by hand on strips that don't have their own built-in dimming control.
Running Multiple Strips Off One Adapter
- Splitter 1-2 Way - runs two Reef Brite LED strips off a single power adapter instead of buying a separate adapter for each.
- Splitter 1-3 Way - runs three Reef Brite LED strips off a single power adapter.
Setup Tips
- Check combined wattage draw before splitting multiple strips off one adapter, to avoid exceeding the adapter's rated output.
- Use the mounting legs for any standalone placement scenario without existing fixture hardware to attach to.
- Position the in-line dimmer somewhere accessible for easy manual adjustment.
Reef Brite mounting and control accessories are available at Marine Concept Supply - order online or pick up at our shop in Wheeling, IL. Shop Mounting Legs, In-Line Dimmer, 1-2 Way Splitter, or 1-3 Way Splitter, and browse more reef lighting accessories.
